Discover the different types of roller garage doors, their costs, installation process, and key tips to help you choose the right one for your home.
In this guide, you’ll learn the types and materials, real world roller garage door prices, installation choices (pro vs DIY), and how to pick the best roller garage door for your home and budget.
After installing roller garage doors across Norfolk and Suffolk for 15+ years at TWF Roller Garage Doors, we have seen firsthand how they transform tight driveways and cramped garages.
A roller garage door lifts straight up and coils into a compact roll above the opening without swing-out panels or intrusive ceiling tracks, which means you reclaim driveway space, gain headroom, and get smoother access for everyday parking and storage.
Available in aluminium with insulated slats, and a wide palette of finishes, a roller door adapts to both modern and traditional homes.
Ready to explore your options? Use our Garage Door Builder to configure your ideal door and get it delivered nationwide, or book a free survey for expert advice tailored if your property is in Norfolk and Suffolk.
Choosing a roller garage door is an investment, which means understanding the full cost and what you are paying for helps you make a confident decision and avoid surprises on installation day.
At TWF, after installing hundreds of roller garage doors across Norfolk and Suffolk, typical UK prices start around £949 for a fitted single door and climb to £1,599 or more for wide, insulated, motorised setups, which means you can budget accurately for what you actually need.
Budget for the complete project, not just the door. Your final price usually includes the roller door curtain, guide tracks, barrel assembly, control gear, and professional fitting if you are in Norfolk or Suffolk.
Electrical work, old door removal, premium finishes such as a black roller garage door, and smart controls can sit outside the base quote unless you request an all-in figure, which means you avoid unwelcome surprises on installation day.
The table below shows typical price ranges and what is usually included, so you can compare quotes with confidence.
| Package Level | Typical Installed Range | What You Usually Get | Common Extras Not in Base Quote |
|---|---|---|---|
| TWF Silver 55mm | From £949 | Insulated aluminium slats (55mm x 14mm), electric motor, UKCA mark, safety brake, manual override, made-to-measure | Remote controls, wireless safety edge, old door disposal, colour upgrades |
| TWF Gold 55mm | From £1,160 | All Silver features PLUS wireless safety edge, control box, two remote fobs included as standard | Premium colours, app control, old door disposal |
| TWF Silver 77mm | From £1,399 | Larger insulated slats (77mm x 19mm), electric motor, suitable for double garages up to 4.875m wide | Remote controls, wireless safety edge, old door disposal, UPVC cladding |
| TWF Gold 77mm | From £1,599 | All Silver 77mm features PLUS wireless safety edge, control box, two remotes, full UPVC cladding included | Premium colours, app control, old door disposal |
When comparing quotes, check scope line by line: door size, insulation type, motor model, safety edge specification, controls, disposal of the old door, and electrical work.
A quick way to verify your quote is to add door cost, installation, electrical, and disposal, then compare the total installed price across at least two garage door suppliers.
For homeowners outside Norfolk and Suffolk, TWF offers DIY roller garage door kits delivered nationwide across the UK. These kits include everything you need for self-installation, with the base door price starting from £485. You must choose a safety edge kit with remote controls for safe operation, and delivery is charged separately.
| Package Level | Base Door Price | Safety Edge Kit with Remote Controls | Delivery | Total Price |
|---|---|---|---|---|
| DIY Roller Garage Door Kit | £485 | Hard Wired Safety Edge Kit with 2 Remote Controls – £135 | £65 | £685 |
| DIY Roller Garage Door Kit | £485 | Wireless Safety Edge Kit with 2 Remote Controls and Teleco Receiver Box – £180 | £65 | £730 |
Visit our Garage door builder page to explore colour options, accessories and place an order.
Several factors move a roller garage door cost up or down. Focus on the choices you can control, then match features to your garage and how you use it.
How to save without cutting corners:
Getting a roller garage door fitted correctly is as important as the door you choose.
Most homeowners in Norfolk and Suffolk opt for professional fitting since it ensures measurements, safe setup, and commissioning are handled in one visit, which means you get immediate peace of mind and a door that works perfectly from day one.
Experienced DIYers across the UK sometimes choose roller garage door kits, which TWF delivers nationwide, to save on labour, particularly on simple single-width openings.
The table below compares professional installation with DIY roller garage door kits, so you can decide which route suits your skills and budget.
| Aspect | Professional Install | DIY Kit |
|---|---|---|
| Who it suits | Most homeowners, complex sites, attached garages | Skilled DIYers with square openings and clear access |
| Typical time on site | Half to one day per door once electrics are ready | One to two days depending on experience |
| Tools and skills | Installer provides specialised tools and lifts | Accurate measuring, drilling into masonry, safe wiring to a spur |
| Safety setup | Included, with testing of safety edge and photocells | Your responsibility, risk of mis alignment or non compliance |
| Warranty impact | Usually preserved, service network available | Some brands limit or void warranty for self install |
| Total cost | Higher upfront, predictable outcome | Lower labour cost, higher risk if rework is needed |
If you go professional, confirm scope, lead time, and disposal of the old door. If you go DIY, verify your kit includes the pre-assembled curtain, guides, fixings, and a compatible motor set. You can compare process steps in our Garage Door Installation Guide, and browse our DIY Roller Shutters and Roller Shutter Garage Doors.
A clear site and accurate measurements prevent delays. Before your fitting day, work through this checklist:
Review the full step by step in our installation guide, especially if you plan to automate an existing manual door.
Powered roller doors must meet local electrical and door safety standards. Look for a tested safety edge, functional photocells, a manual release accessible from outside if your garage is the only entry, and documentation that confirms wind and usage ratings.
Many installers include testing on handover, and reputable brands publish safety details. If energy performance is a priority, compare insulated options for context, then align your roller specification accordingly without overbuying.
Start with your opening and your use case, then work forward to the specification. This approach prevents overspending while keeping performance where you need it.
Compare three short listed quotes using measurable specs:
To find and vet suppliers, start with research on reputable local installers.
A well specified and maintained door should last 15 years or more, which means you protect your investment and enjoy smooth, reliable operation for years to come.
Plan for light maintenance each year, a service visit every 12 to 24 months on automated doors, and occasional component replacements such as remotes or safety edge strips.
Essentials that protect performance and finish:
Typical warranty ranges are 5 to 10 years on the curtain and 2 to 5 years on motors and controls, so make sure your installer spells this out clearly before you sign.
Insulated roller doors can reduce heat loss in attached garages, which helps adjacent rooms feel more stable, so you cut energy bills and improve comfort throughout your home.
Aluminium components are widely recyclable, and many manufacturers use durable powder coats with low VOC content.
If thermal performance is your top driver, compare U values across door types and make sure your garage walls and ceiling are insulated to unlock the full benefit.
Once you understand basic operation, performance depends on the slat profile, roll diameter, and drive sizing. Slat pitch and thickness determine the minimum coil size and therefore headroom.
Common residential profiles use 55 mm or 77 mm high slats. The larger section produces a stiffer curtain and smaller deflection under wind load, but increases coil diameter.
As a rule of thumb, a 77mm insulated profile can require 300-400mm of headroom for the roll, while a 55mm system may sit closer to 250-320mm depending on height and axle, which means careful measurement prevents costly rework.
Misjudging this creates a tell tale bottom slat that stops short of the floor or a roll that clashes with a soffit.
Drive torque should match door mass plus friction at a safety factor that accounts for cold-weather seal drag and wind.
Tubular motors list Newton-metre ratings; for a single-width insulated curtain of 60-80kg, a 60-80Nm unit can suffice, while wider or taller installs often step up to 100-120Nm with soft-start control to reduce noise and wear, which means you get quieter operation and longer component life.
Ask for the motor’s duty cycle and thermal protection curve. Premium units handle multi-cycle days without nuisance cut-outs, which matters for home gyms, workshops, and households with frequent comings and goings.
Noise claims vary. Look for published dBA at 1 meter outside the guide channel and, more importantly, subjective noise inside adjacent rooms.
Insulated slats paired with brush-sealed guides and soft-start electronics typically reduce operating noise by 4-7dBA compared with single-skin setups, which means you can open the door early morning or late evening without disturbing the household.
If the garage is under a bedroom, ask the installer to specify anti-vibration mounting blocks on the guide feet and to isolate the axle brackets from resonant steel beams.
Thermal figures for insulated roller curtains typically land around a whole-door U-value of 4-5W/m²K, which is respectable but not equal to top-tier insulated sectional garage doors.
The gap at the roll and side guides is the limiting factor.
If the space is conditioned, push for deep brush stacks, a compressible bottom seal suited to your floor’s contour, and a hood that encloses the coil to cut convective losses, so you maximise energy efficiency and comfort.
A basic thermal camera scan after commissioning will reveal leakage paths you can address with seal upgrades.
Beyond general robustness, specify a tested package. Anti-lift devices in the axle or bottom rail, auto-locking gear, and steel end locks reduce prying risk, which means you sleep soundly knowing your belongings are protected.
For high-exposure sites, ask whether the door has been independently assessed to standards such as Secured by Design or relevant LPCB grades for domestic shutters.
On powered models, make sure the system aligns with EN 12453 requirements for force limitation and includes both a monitored safety edge and photocells.
Document where the manual override sits and verify that you can access it from outside if the garage lacks a secondary door. Keep a spare emergency release key off site.
Upfront costs rarely reflect the full picture. Build a 10-year model:
To compare quotes properly, calculate total 10-year cost per cycle, assuming 4-6 cycles per day.
A slightly higher roller garage door price can still be the better buy if standby draw is lower and service intervals stretch longer, which means you save money over the door’s lifetime, not just on day one.
Roller garage door kits suit straight, single openings on outbuildings with clear reveals and easy electrical access.
You need accurate measuring, comfort with power tools, and a willingness to fine-tune guide alignment within millimetres, so you achieve smooth operation and avoid premature wear.
Kits save money but can void parts of the warranty if installed off-spec, which means the £300 you save could cost you £800 in repairs if something goes wrong.
For a tougher outbuilding or security-first approach, explore the pros and cons of going fully DIY. Slat sizing also matters – 55 mm versus 77 mm profiles have different wind load and roll-up implications.
When searching for a roller garage door installer, write a short specification and compare installers against it:
Shortlist installers with strong reviews and rapid aftercare. Start with vetted local fitters or national networks, then validate pricing and timelines with two to three comparable quotes.
For homeowners comparing the best roller garage door options side by side, keep a copy of your spec and measure every quote against it rather than chasing a headline roller garage door cost.
Ultimately, a roller garage door delivers the space efficiency, security, and smart convenience that modern homes demand, without compromising kerb appeal.
Choose with intent: lock in the protection level you expect, select the insulation that suits your climate and garage use, and specify motor and app control that match your lifestyle.
Pair the right material with your setting (aluminium for corrosion resistance, steel for robustness) and select a finish you will love long-term; a black finish looks striking when backed by a high-quality coating and routine care.
Treat cost as an all in figure. Demand itemised, written quotes that include the door, installation, electrics, and old door removal, then compare warranties, service coverage, and lead times. That’s how you secure true value, not just a headline price.
Source with confidence. Shortlist reputable brands and trusted local installers near you, verify reviews and credentials, and schedule a site survey to confirm measurements and specifications before you sign.
Install safely and correctly. Professional fitting ensures compliance and reliable operation; DIY kits suit only experienced hands willing to own measurement accuracy, tooling, and warranty implications.
Own the outcome. Commit to simple upkeep (regular cleaning, lubrication, and monthly safety checks) plus an annual service to preserve smooth, quiet operation and keep darker finishes looking sharp for years.
In conclusion, the evidence shows that aligning features, finish, and budget with your home yields the best-performing, best-looking door.
Ready to get started? Browse our roller garage door range, use the Garage Door Builder to design your perfect door, or book a free survey for expert guidance in Norfolk and Suffolk. We’re here to help you choose the right door and install it with confidence.
Most domestic roller garage doors need 205–300 mm of headroom above the opening for the roll and hood, plus 60–100 mm of side room per guide rail. Larger or wind-rated models may need a little more. Typical maximums for homes are up to ~5.0–5.5 m wide and ~3.0 m high, but exact limits vary by brand. If you’re short on headroom, ask about external (face-fixed) roll options designed for tight spaces.
A typical installed roller garage door price ranges from £1,050–£1,200 for manual single-skin singles to £4,400+ for large, insulated, motorised doubles. The final roller garage door cost depends on size, insulation (single-skin vs. double-skin), motorisation and smart features, custom colours (e.g., a black finish), and site needs. Don’t forget extras like old door disposal, electrical outlet work, and premium coatings, so ask for an all in written quote.
Yes, if you specify the right finish. A black roller garage door absorbs more heat, so choose high-quality powder coating with UV resistance to reduce fading and thermal stress. In coastal zones, prioritise corrosion-resistant aluminium slats and marine-grade hardware. Good ventilation, regular washing to remove salt and dust, and avoiding dark colours on south-facing facades without shade can further extend finish life.
DIY roller garage door kits can work for confident, well-equipped homeowners on simple openings. Expect 4–8 hours with two people, accurate measurements, and safe lifting of components that can weigh 60–120 kg. You’ll need a drill/driver, level, fixings, and safe access. However, misalignment can cause premature wear or safety faults, and some brands limit warranties on self-installs. For most homes, especially motorised and insulated models, professional installation is the safer, faster route.
A well-specified roller garage door is very secure. Look for auto-locking or anti-lift systems, reinforced bottom rails, wind locks/end locks on slats, and strong guide channels. For powered doors, choose rolling code remotes and secure manual overrides. Independent accreditations (e.g., security ratings) and a one-piece aluminium curtain with 77 mm slats enhance resistance to prying. Professional fitting and correct anchoring are critical to real-world security.
Clean the curtain and guides quarterly with mild detergent to prevent grit wear. Lubricate moving parts lightly with a dry PTFE or silicone (avoid heavy grease in guides), and test auto-reverse/safety edges monthly. Have a professional service the motor, balance, and fixings annually. These simple tasks improve longevity (15+ years is common) and keep operation quiet and reliable.
Yes. Motorised doors include a manual override so you can disengage the drive and operate the door by hand. If the garage has no secondary entrance, specify an external manual release during installation. For convenience, add a battery backup so the door continues to open and close during power outages while maintaining safety edge and control functions.
Search for a roller garage door installer in your area and shortlist installers with recent 5-star reviews, insurance, and direct partnerships with reputable manufacturers. Your quote should include the exact door specification (size, insulation, colour/finish), motor model, safety devices, removal of the old door, electrical requirements, warranties (motor and curtain), and lead time. Get 2-3 fixed-price quotes and confirm aftercare and emergency support response times.
Pick a roller garage door when headroom is tight, you want to park close to the door, or you value a compact roll with no ceiling tracks. Choose a sectional when maximum insulation and sealing are top priorities or you prefer paneled aesthetics. Roller doors win on space efficiency and simplicity; sectionals often edge out on thermal performance and ultra-quiet operation. Your site constraints and comfort goals should guide the decision.
Pick your door colour and property type and watch what your dream Garage doors looks like?
Then simply complete the builder form in less than a minute and order your Garage door today.
© 2025 – TWF Roller Garage Doors is a trading name of TWF Ltd | All rights reserved.
TWF Ltd is an independent retailer and is not authorised by or affiliated with any garage door manufacturer mentioned. Product names, including “Roller Garage Doors,” may be trademarks of their respective owners.
© 2025 – TWF Roller Garage Doors is a trading name of TWF Ltd | All rights reserved. TWF Ltd is an independent retailer and is not authorised by or affiliated with any garage door manufacturer mentioned. Product names, including “Roller Garage Doors,” may be trademarks of their respective owners.
